Troy-Bilt 31AS6FEE Snow Blower Manual

The Troy-Bilt 31AS6FEE is a powerful snow blower designed to tackle heavy snowfall with ease. Featuring a 24-inch clearing width and a 208cc engine, this snow blower is equipped with a 6-speed transmission for optimal control and maneuverability. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Snow Blower 8. Maintenance and Care 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 24-inch clearing width, 208cc engine, 6-speed transmission, adjustable chute, and ergonomic controls.

Feature	Description
Clearing Width	24 inches for efficient snow removal
Engine	208cc for powerful performance
Transmission	6-speed for optimal control
Chute Control	Adjustable chute for directing snow
Ergonomic Handles	Comfortable grip for ease of use

Installation

Unpack and inspect contents. Assemble the snow blower according to the manual.

Attach the handles: Align and secure using provided bolts.
Check oil level: Ensure engine oil is filled to the recommended level.
Fill fuel tank: Use fresh gasoline as per specifications.
Inspect all connections: Ensure all parts are securely attached.

WARNING! Always read the manual before operating. Ensure all safety features are functional.

First-Time Setup

Power on the snow blower; follow the setup instructions in the manual.

Check controls: Familiarize yourself with the control panel.
Adjust chute: Set the chute direction for optimal snow throwing.
Test operation: Start the engine and test the controls.

CAUTION! Ensure the area is clear of obstacles before operation.

Specifications

Model: Troy-Bilt 31AS6FEE
Engine: 208cc 4-cycle
Clearing Width: 24 inches
Transmission: 6-speed
Weight: 120 lbs
Fuel Type: Unleaded gasoline
Oil Capacity: 0.6 quarts
Warranty: 2 years limited

Controls and Settings

Access controls via the control panel. Key controls include: throttle, chute direction, and speed settings.

Throttle: Adjusts engine speed for optimal performance.

Chute Direction: Control the angle and direction of snow discharge.

Connecting Accessories

Ensure all accessories are compatible with the snow blower.

Turn off the engine before connecting accessories.
Follow the instructions for each accessory for proper installation.

Tip: Use only Troy-Bilt approved accessories for best performance.

Operating the Snow Blower

Follow these steps for effective snow removal:

Start the engine: Follow the starting procedure in the manual.
Adjust speed: Set the desired speed for snow conditions.
Direct snow: Use the chute control to direct snow away from pathways.

WARNING! Do not operate on steep inclines or in extreme weather conditions.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Check oil level regularly and change as needed.
Clean the snow blower after each use to prevent rust.
Inspect belts and cables for wear and replace if necessary.

CAUTION! Always disconnect the spark plug before performing maintenance.

Safety Information

Read all safety instructions before operating the snow blower.

Wear appropriate clothing and safety gear.
Keep hands and feet away from moving parts.
Do not operate in enclosed spaces.

Regulatory Information

This snow blower complies with all applicable safety standards. For support, visit www.troybilt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Fuel issue	Check fuel level and quality.
Snow not clearing	Clogged chute	Clear the chute of snow and debris.
Unusual noise	Loose parts	Inspect for loose bolts and tighten as necessary.
Vibration during operation	Imbalanced auger	Check for obstructions and clear if necessary.

Reset: Refer to the manual for reset procedures if available.

Service: For service inquiries, contact 1-800-828-5500 or visit www.troybilt.com.