Troy-Bilt 31AS6FEF Snow Blower Manual

The Troy-Bilt 31AS6FEF is a powerful snow blower designed to tackle heavy snowfalls with ease. Featuring a 24-inch clearing width and a 208cc engine, this snow blower is equipped with a 6-speed transmission for optimal control. It includes an adjustable chute for directing snow away from pathways and driveways, as well as heated hand grips for comfort during operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 208cc engine, 24-inch clearing width, 6-speed transmission, adjustable chute, heated hand grips.

Installation

Unpack and inspect contents. Ensure all parts are included.

1. Assemble the handle: Follow the included instructions to attach the handle securely.
2. Check oil level: Ensure the engine oil is filled to the recommended level.
3. Fuel the snow blower: Use fresh gasoline and fill the tank.
4. Test the controls: Ensure all controls are functioning properly before use.

WARNING! Always read the manual before operating the snow blower.

First-Time Setup

Power on the snow blower; follow the setup instructions.

1. Adjust the chute: Set the chute direction according to your needs.
2. Check the auger: Ensure the auger is clear of any obstructions.
3. Test the starter: Pull the starter cord to ensure the engine starts smoothly.
4. Familiarize with controls: Understand the function of each control before operation.

CAUTION! Ensure the area is clear of people and pets before starting.

Specifications

• Engine: 208cc 4-cycle OHV.
• Clearing Width: 24 inches.
• Transmission: 6-speed (forward and reverse).
• Chute Rotation: 180 degrees.
• Weight: Approximately 120 lbs.
• Fuel Capacity: 0.8 gallons.
• Oil Capacity: 0.6 quarts.
• Operating Temperature: Designed for use in cold weather conditions.

Controls and Settings

Access controls on the handle: throttle, chute control, and speed settings.

Safety Features: Engine shut-off, safety key, and auger control.

Adjustable settings for speed and chute direction for optimal performance.

Connecting Devices

No external devices are required for operation.

1. Ensure the snow blower is properly assembled before use.
2. Check fuel and oil levels before starting.

Tip: Always operate in a well-lit area for safety.

Operating Instructions

Follow these steps for effective snow removal:

1. Start the engine: Pull the starter cord firmly.
2. Adjust speed: Use the throttle to set your desired speed.
3. Direct snow: Use the chute control to direct snow away from your path.
4. Monitor surroundings: Always be aware of your environment while operating.

WARNING! Do not operate on steep inclines or uneven surfaces.

Maintenance

Regular maintenance is essential for optimal performance.

1. Check oil level regularly and change as needed.
2. Inspect the auger and chute for blockages.
3. Clean the snow blower after each use to prevent rust.
4. Store in a dry place during off-season.

CAUTION! Always disconnect the spark plug before performing maintenance.

Safety Information

Read all safety instructions before operating the snow blower.

• Wear appropriate clothing and safety gear.
• Keep hands and feet away from moving parts.
• Do not operate in enclosed spaces.
• Always be aware of your surroundings.

Regulatory Information

This snow blower complies with all applicable safety standards. For support, visit www.troybilt.com or contact customer service.

Troubleshooting

Reset: Refer to the manual for reset procedures if applicable.

Service: For assistance, contact Troy-Bilt customer service.