Troy-Bilt Storm S6R72 Snow Blower Manual

The Troy-Bilt Storm S6R72 is a powerful snow blower designed for heavy-duty snow removal. With a 6-speed transmission and a 72-inch clearing width, it efficiently clears snow from driveways and sidewalks. This manual provides essential information on safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Operation Instructions 4. Specifications 5. Maintenance 6. Troubleshooting

Features at a Glance

Key features include a powerful engine, adjustable chute, and ergonomic controls for ease of use.

Feature	Description
Engine	Powerful 420cc engine for efficient snow removal
Clearing Width	72 inches for wide snow clearing
Transmission	6-speed transmission for optimal control
Chute Control	Remote chute control for directional snow throwing
Headlight	Built-in headlight for nighttime operation

Safety Information

Always wear appropriate clothing and safety gear when operating the snow blower. Read the manual thoroughly before use.

Keep hands and feet away from moving parts.
Do not operate in enclosed spaces.
Ensure proper maintenance is performed regularly.

WARNING! Failure to follow safety instructions may result in injury.

Operation Instructions

To operate the snow blower, follow these steps:

Start the engine using the ignition key.
Adjust the throttle to the desired speed.
Use the chute control to direct the snow.
Clear snow in a systematic manner for best results.

CAUTION! Always be aware of your surroundings while operating.

Specifications

Engine Type: 420cc OHV engine.
Clearing Width: 72 inches.
Weight: 250 lbs.
Fuel Capacity: 5 quarts.
Transmission: 6-speed with reverse.
Chute Rotation: 200 degrees.
Headlight: Yes.

Maintenance

Regular maintenance is crucial for optimal performance. Follow these guidelines:

Check oil levels before each use.
Clean the snow blower after each use.
Inspect and replace worn parts as necessary.

Tip: Refer to the maintenance schedule in the manual for detailed instructions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	Fuel issue	Check fuel level and quality.
Snow not clearing	Clogged chute	Clear any obstructions in the chute.
Unusual noise	Loose parts	Inspect and tighten any loose components.
Difficulty steering	Improper tire pressure	Check and adjust tire pressure.

Reset: Refer to the manual for reset procedures if applicable.

Service: For assistance, contact Troy-Bilt customer service.